TileBar New Rock Chevron

Final Product Size/Shape: 4 in x 21 in, Fumo Gray
Color: Fumo Gray

Get this sample delivered Mon

Material Sample

23 in x 4 in $5.00

Final Product Size/Shape: 4 in x 21 in

$5.00
/ sample

Looking for the final product?

Sample on DesignShop, then discover where to purchase from our brand partners

retails at:$18.45 per square foot

Tile Description

The New Rock Collection features an authentic homage to Italian limestone made entirely of porcelain. This series of Italian-made, color-body porcelain tiles is offered in sophisticated neutral colorways with soft shade variations, realistically mirroring the look of stone, while offering all the benefits of porcelain. A matte finish adds a modern layer to the timeless elegance of stone look tile, providing a silky-smooth surface. A fully dedicated collection, the New Rock series is available in an array of sizes and formats, from large 24-by-48-inch tiles to mosaic patterns, allowing for design versatility in commercial and residential projects.

Final Product Size:
4 in x 21 in
Availability:
Typically Stocked
Suitable For:
Backsplash, Bedroom Flooring, Entry & Hallway Flooring, Living Area Flooring, Kitchen Flooring, Kitchen Wall, Bedroom Wall, Entry & Hallway Wall, Living Area Wall, Bathroom Flooring, Bathroom Wall, Shower Wall, Shower Flooring, Outdoor Wall, Outdoor Flooring, Pool Coping, Fireplace Mantel, Fireplace Surround
Indoor/Outdoor Use:
Indoor, Outdoor
Country of Origin:
Italy

Color:
Fumo Gray
What It’s Made Of:
Porcelain
Surface Finish:
Matte
Shade Variation:
V2: slight - moderate

Tile Type:
Field Tile
Shape:
Parallelogram & Chevron
Format:
Modular
Width:
4 in
Thickness:
10.5 mm
Installation Guidelines:
Please refer to and install our products to the set standards set by the TCNA. To avoid affecting the color of the tile, white thinset such as Bostik PM is highly recommended for all installations. Apply as much adhesive as can be covered within 10-15 minutes
Installation Method:
Glue Down / Adhesive / Mortar
Grout Width:
0.063 in

Care Instructions:
Highly recommended to purchase the Unpolished Porcelain Maintenance Kit. Porcelain tile is resistant to germs and bacteria and it is also among the easiest of flooring materials to clean. You can clean your porcelain tile with a damp sponge mop. A solution of 1/4 cup of white vinegar to 2 gallons of water works best – allow time for drying. You can also sweep or vacuum. Although porcelain tile is by definition impervious, it is still possible for its surface to discolor. The following instructions explain how to clean porcelain tile surfaces. For cleaning unpolished surfaces, follow these instructions: Sweep or vacuum dust and debris from the floor. When sweeping, use a soft-bristle broom and sweep in 2 directions. First follow the direction of the tile, and then sweep diagonally. This will ensure the removal of all foreign material that might be residing in the texture. Saturate the tile with a neutral cleaning solution, such as vinegar, with hot water and stir. Allow the cleaning solution to remain on the floor 5 – 10 minutes. Scrub the floor with a brush; again using a two-direction method. Rinse the floor with clean, clear water to remove the cleaning solution. For high traffic locations, it is recommended to clean the floor at least once per day and wet mop at regular intervals. Do not clean tile flooring with ammonia or with cleaners that contain bleach and/or acid. Acid and ammonia based cleaners may modify grout color. Do not use wax, oil-based, abrasive cleaners, or sealants. Agents that contain any dyes or colors are not recommended. Use rugs at entrances to prevent dirt and grit from being tracked onto the tile flooring from outdoors. Do not use steel wool pads, because loose steel particles may create rust stains in the grout
California Prop 65:
No
Sample Size:
23 in x 4 in
DesignShop SKU:
100545255
Brand SKU:
TLMGAGFM4X21

Recommended

More from Collection

$5.00
/ sample